Farm-use Ring Die Feed Pellet Mill Commercial Pellet Quality at Farm Budget
The farm-use ring die mill brings ring die pellet quality — high density, smooth surface, good water stability — down to the 0.5–3 T/H range a large farm or a small commercial feed workshop actually needs. It keeps the structure simpler and the price far below an industrial HM-series line.
Reference FOB price: USD 4,500 – 15,000 by model. Includes die matched to your material and installation drawings.

Ring Die Quality Without Industrial-Scale Investment
An industrial HM-series line makes sense from about 2 T/H upward with steam and automation. Below that, most of the investment is in capacity you will not use. The farm-use ring die mill keeps the parts that matter — the ring die, the rollers, the conditioning — and drops the rest.
Self-supply
A farm feeding its own pigs, cattle or poultry cuts bought-feed cost and controls the formula.
Sell locally
Produce 1–3 T/H for neighbouring farms; the pellet quality is accepted by commercial buyers.
Sinking feed
1.5–4 mm sinking pellets with water stability far better than a flat die mill.
Custom formula
Process both low-moisture powder feed and higher-moisture fresh material.
Farm-use Ring Die Feed Pellet Mill Specifications
The HM-200 and HM-250 use a 6-stage motor for higher torque at lower speed; the HM-320 moves to a 4-stage motor as capacity increases. All four share the same ring die assembly design, so wear parts are interchangeable across the range.
| Model | Main power | Capacity (T/H) | Die inner dia. (mm) | Pellet size (mm) | Dimensions (mm) |
|---|---|---|---|---|---|
| HM-200 | 15 kW (6-stage motor) | 0.5–0.8 | 200 | 1.5–12 | 1200 × 1000 × 1350 |
| HM-250 | 22 kW (6-stage motor) | 0.8–1.0 | 250 | 1.5–12 | 1400 × 1500 × 1450 |
| HM-320 | 37 kW (4-stage motor) | 2–3 | 320 | 1.5–12 | 2100 × 1550 × 1060 |
| HM-350 | 30 kW | 2.5–3 | 350 | 1.5–12 | 2220 × 1160 × 1450 |
Capacity is for standard poultry feed with a 4 mm die. Pellet length adjustable from 5 to 20 mm by knife position. The 1.5–12 mm pellet range is wider than an industrial ring die mill, which typically runs 2–10 mm.
Why the 1.5–12 mm range matters
Industrial machines are optimised for a narrow band. A farm machine has to make 1.5 mm chick starter one week and 8 mm cattle pellets the next. This series covers the full range on one machine by changing only the die — no gearbox change, no second machine.
Fresh or dry material
This series processes both low-moisture powder feed and fresh material with higher moisture content, which many industrial machines cannot do without conditioning adjustment. Useful for farms pelleting silage-based or by-product based rations.
Quick quote — farm-use model and die set
Tell us the animals you feed, the target T/H and the pellet sizes you need. We reply with the model, die set and a landed budget. Send the details to info@pelletmachines.net or WhatsApp +86 186 0385 1787 — engineers reply within 12 hours.
Farm-use or Industrial Ring Die Mill — The Real Differences
Both make ring die pellets. The question is which one you will still be happy operating in year three.
| Item | Farm-use ring die (this page) | Industrial ring die (HM) |
|---|---|---|
| Capacity | 0.5–3 T/H | 2–20 T/H per unit |
| Pellet diameter | 1.5–12 mm on one machine | 2–10 mm |
| Conditioning | Single-layer conditioner | Single, double or triple-layer |
| Structure | Simplified, fewer control points | Full automation, load and temperature monitoring |
| Steam requirement | Optional / light | Required for full capacity |
| Running hours | 8–12 h/day | 20–24 h/day continuous |
| Footprint & installation | Compact; no boiler required | Larger; boiler and conveying needed |
| Investment | USD 4,500 – 15,000 | USD 12,000 – 52,000 |
| Best for | Large farm, small commercial mill, limited budget | Feed mill, integrator, export-grade production |
If you plan to grow past 3–5 T/H within two years, buying the industrial HM-series ring die mill once is cheaper than buying twice. If 3 T/H is your ceiling, this series saves a large amount of capital.
How the Farm Ring Die Mill Works
Same physics as an industrial machine, simplified drive. Understanding the conditioning step is where most pellet quality is won or lost.
Feeding
Mash is metered into the conditioning chamber by a screw feeder matched to motor load.
Conditioning
Optional steam softening raises mash temperature and moisture so starch gelatinises and binds.
Pressing
Two rollers press conditioned mash outwards through the rotating ring die under high pressure.
Cutting
Adjustable knives cut the strands to the length set for your animal and pellet size.
Discharge
Pellets leave at 70–90 °C and go to cooling before bagging or storage.
What the pellets look like — and why animals eat more of them
Pellets from a ring die mill leave the die at moderate temperature, so micronutrients in the raw material survive the process. Texture is uniform, the surface is smooth and the shape is consistent, which raises palatability and feed intake.
Because density is high, pellets store and transport well and do not segregate the way mash does. Animals cannot pick out the tasty bits, so every mouthful carries the intended nutrition.
Fish and shrimp feed made on this machine holds together in water far longer than flat die pellets — less waste, less water pollution and a better feed conversion ratio.

- Moderate temperature rise keeps vitamins and micro-elements intact
- High density pellets store and transport without breaking down
- Uniform texture and smooth surface improve palatability
- Pellet diameter 1.5–12 mm and length 5–20 mm on one machine
- Processes both low-moisture powder and higher-moisture fresh feed
- Simple structure with low maintenance cost and reasonable price
Which Animals and Which Pellet Size
Pellet diameter should follow the animal and its growth stage. Here is the practical mapping we use when specifying dies.
| Animal | Growth stage | Pellet dia. (mm) | Recommended model |
|---|---|---|---|
| Poultry — chick | Starter | 1.5–2.5 | HM-200 / HM-250 |
| Poultry — broiler, layer | Grower / finisher | 3–4 | HM-250 / HM-320 |
| Pig | Weaner to finisher | 3–5 | HM-250 / HM-320 |
| Cattle, sheep | All stages | 6–8 | HM-320 / HM-350 |
| Fish, shrimp | Pond farming | 1.5–4 | HM-200 / HM-250 with conditioner |
| Rabbit, pigeon | All stages | 2.5–4 | HM-200 / HM-250 |
Dies are interchangeable across the HM-200–350 range, so one machine covers your whole herd. We supply the die set matched to the animals on your farm.
Farm-use Ring Die Feed Pellet Mill Questions
How much does a farm-use ring die pellet mill cost?
What is the difference from the industrial HM series?
Do I need a steam boiler?
Can it handle fresh material with high moisture?
How many hours per day can it run?
What does installation involve?
Can I upgrade to a bigger die later?
What is the warranty and spare parts situation?
Not sure between farm-use and industrial?
Tell us your target T/H, the animals you feed and how many hours per day you plan to run. We tell you honestly which series fits — within 12 hours. Send the details to info@pelletmachines.net or WhatsApp +86 186 0385 1787 — engineers reply within 12 hours.
Pellet Machines and Equipment for Farm-Scale Plants
- Industrial Ring Die Pellet Mill (HM)
- Electric Flat Die Pellet Mill
- Diesel Portable Pellet Mill
- Ring Die Aquatic Feed Pellet Mill
- Poultry Feed Hammer Mill
- Double Paddle Feed Mixer
- Counterflow Pellet Cooler
- Feed Pellet Crumbler
- 400–600 kg/h Pellet Line
- 800–1000 kg/h Pellet Plant
- Plant Installed in Bangladesh
- Pellet Mill to Pakistan
Get Your Farm Ring Die Model and Die Set
Since 2006 we have built ring die pellet mills for farms and small commercial mills in more than 100 countries. Send your animals, target output and pellet sizes — you get a model, die set and investment range within 12 hours.

