Grass Pellet Production Line1–3.5 t/h · hay, alfalfa and straw into ruminant feed
A bale goes in at one end, a 6–8 mm pellet comes out at the other. Chopper, hammer mill, mixer, vertical ring die pellet mill, cooler and bagger — sized so the mill sets the pace and nothing upstream starves it.
- 1, 2 and 3 t/h configurations, built on the HML-560 / 600 / 700
- Bale chopper first: round and square bales broken and cut to 30–50 mm
- No steam boiler — grass pellets form on pressure and moisture alone
Reference FOB USD 28,000 – 95,000 by capacity · layout drawing for your building and budget range back within 12 hours.

Why pellet grass
Loose hay is 85% air.
A pellet is not.
Grass hay at 12% moisture has a bulk density of 100–150 kg/m³ loose. You are paying to move, store and ship air.
Pelleted at 6–8 mm the same grass runs 620–680 kg/m³ — four to five times the tonnage in the same barn, container or truck. For a farmer selling hay that is the whole business case, and it arrives before any question about machinery.
The second reason is waste. Fed as long hay, a quarter to a third is pulled out of the rack, trampled and soiled. As a pellet there is nothing to sort through and nothing to refuse — intake goes up because the animal cannot be selective, and the ration it eats is the ration you formulated.
The third reason is the season. A bale keeps six months in a dry shed and moulds in a wet one. A pellet at 12% moisture, bagged or in a silo, keeps a year and can be sold into a drought.
You are not selling grass. You are selling tonnes per cubic metre and a feed the animal cannot waste.
The line
Six stages, bale to bag
The mill is one stage. Everything upstream of it decides whether the mill runs at its rating or at 70% of it.
01
Bale chopping
Round or square bales dropped into a 1.5–2 m tub, cut by a rotating drum to 30–50 mm and carried out on a belt.
02
Grinding
Hammer mill with a 4–6 mm screen brings the chop down to a particle size the die can form — 22–37 kW for 1–2 t/h.
03
Mixing
Ribbon blender adds molasses, urea, minerals and a little water, and evens out moisture across the batch.
04
Pelleting
Vertical ring die mill presses the mix at 6–8 mm. No steam — pressure and 14–16% moisture do the work.
05
Cooling
Counterflow cooler brings 70–90 °C pellets to within 5 °C of ambient, so bags do not sweat in transit.
06
Weighing & bagging
20–50 kg woven bags at ±0.2%, or bulk loading into a silo truck.
Stage by stage
What each machine has to do
Sized against each other, not against a catalogue. The chopper and the hammer mill are where most under-performing grass lines lose their tonnage.



-
Chopper — the stage people under-buy
A bale is a solid block. The chopper has to break it and cut it, not just tear it. Undersized here and everything downstream runs at half rate, because long strands bridge in the hammer mill inlet and wrap the die.
-
Hammer mill — screen, not motor
Grass is light, so a big motor on a small screen does nothing. A 4–6 mm screen and a wide grinding chamber give the throughput; the motor only has to keep tip speed up.
-
Mixer — where the ration is made
Molasses raises energy and binds the pellet; urea raises crude protein on straw; minerals balance the ration. Added here, not at the mill.
-
Pellet mill — vertical ring die
Stationary die, orbiting rollers. Light material is thrown onto the die face instead of being dragged into a nip, which is why this layout holds rate on grass where a horizontal mill does not.
The first machine
The chopper does more work than people expect
It is the cheapest machine in the line and the one that decides whether the rest of it runs at rating.
Break the bale, cut the strand
Round and square bales are dropped whole into a 1.5–2 m tub. A drum with hardened blades cuts them against a fixed bed knife to 30–50 mm, and a discharge belt lifts the chop to the hammer mill.
Two numbers matter. Strand length — over 50 mm and the hammer mill cannot keep up, because long fibre wraps the rotor instead of being struck. Throughput — the chopper must run 20–30% ahead of the mill, or the mill waits.
Ours is built on a wheeled chassis so it can be parked at the bale stack and fed by hand or by loader, rather than forcing you to bring bales to a fixed station.

Video
The line running
One long walk-through of a complete grass line, then four short clips of the same line and its mill in production.
Configurations
Three sizes, and what comes with each
Same flow, three tonnages. The mill sets the size of everything else, so the configuration follows the HML model rather than the other way round.
| Configuration | Pellet mill | Chopper | Hammer mill | Cooler | Footprint |
|---|---|---|---|---|---|
| 1 t/h | HML-560 · 90 kW | 1.5 m tub, 15 kW | Wide chamber, 22 kW | Counterflow, 1.5 m³ | ≈ 18 × 4 m |
| 2 t/h | HML-600 · 132 kW | 1.8 m tub, 22 kW | Wide chamber, 30 kW | Counterflow, 2.5 m³ | ≈ 22 × 5 m |
| 3 t/h | HML-700 · 160 kW | 2.0 m tub, 30 kW | Wide chamber, 37 kW | Counterflow, 3.5 m³ | ≈ 26 × 5 m |
Footprint is the machine line only — add 3–4 m for bag storage and 2 m walkway. If your building is tighter than this, we re-draw the line in an L or a U before you pour concrete.
What the pellet has to hit
| Property | Target | Why it matters |
|---|---|---|
| Diameter | 6–8 mm | Cattle and sheep; 8–10 mm for camels and horses |
| Density | 620–680 kg/m³ | Below 600 the transport saving disappears |
| Durability | ≥ 95% | Fines in the bag are money on the floor |
| Moisture | ≤ 12% | Above 13% the bag sweats and moulds in the stack |
| Crude protein | 8–18% | Set by the ration, not the machine — alfalfa runs highest |
Questions
Grass pellet production line FAQ
How much does a grass pellet production line cost?
Reference FOB: about USD 28,000–40,000 for 1 t/h, USD 45,000–65,000 for 2 t/h and USD 70,000–95,000 for 3 t/h, including chopper, hammer mill, mixer, vertical ring die mill, cooler, bagging machine and the conveyors between them. Steel structure, silos and electrical installation are quoted separately against your building.
Can I start with just the pellet mill and add the rest later?
Yes, and about half our customers do. The mill runs on pre-chopped and pre-ground material; you add the chopper and hammer mill when volume justifies it. Buy the mill one size larger than today’s tonnage so the rest of the line can catch up to it.
Do I need to dry the grass before pelleting?
Only if it comes in wet. Grass needs 12–16% moisture at the die; fresh-cut grass is 25–30%, so it is usually wilted in the field or under cover for a day or two. In a wet climate we add a dryer, which is the one item that changes the budget significantly.
What is the difference between this and a normal feed pellet line?
A feed line grinds grain, batches by weight, conditions with steam and pellets a high-starch mash. A grass line chops bales, grinds forage, mixes molasses and minerals, and pellets high-fibre material without steam. The machines overlap; the sizing does not.
How many people does it take to run?
Two per shift for 1–2 t/h: one loading bales and watching the chopper, one at the mill and bagger. The PLC option adds automatic sequencing and lets one operator cover the line, at the cost of a bigger cabinet and more sensors.
What is the delivery and installation time?
35–45 days production for a 1–2 t/h line, 45–60 days for 3 t/h with steel structure. Installation is two to three weeks on site, most of it conveyors and structure rather than machines. An engineer attends start-up and the first production runs.
Can the line also run straw or wood chips?
Straw, yes — same flow, different die. Wood chips need a different grinder (a chipper before the hammer mill) and a different die ratio, and we quote that as a separate configuration rather than pretending one line does everything well.
Next step
Send the tonnage and the building, get a layout
Tell us the tonnage per hour, what you are pelleting and the inside dimensions of your shed. You get a machine list, a layout drawing and an investment range — from an engineer, within 12 hours.
- Emailinfo@pelletmachines.net
- WhatsApp+86 186 0385 1787
- MillVertical ring die pellet mill — HML series
Photos of your building are welcome — we size from them.
Request line layout & price
No forms to download. Describe the plant and we do the sizing.





